KIDZZ MultiMitzz Mitt Blockers
**Please note that this is a PRE-ORDER, so they may take 2-4 weeks to be ready to ship**
PLEASE NOTE - THESE MITT BLOCKERS ARE MAINLY INTENDED FOR THE PHOTOGRAPHING AND DISPLAY OF YOUR FINISHED PRODUCT. THOUGH THEY MAY BE USED FOR GENTLE WET (DAMP) BLOCKING, PLEASE DO SO CAREFULLY AND AT YOUR OWN RISK.
These mitt blockers are crafted from 1/4" Baltic Birch plywood, sanded smooth, and finished with several coats of polyurethane, and then finished off with a paste wax. Just like our REGULAR mitt blockers, but MULTI!! Each of THESE sets (they come in pairs) is like two in one - either a kids small & medium OR medium & large in each set.
From the regular mitt blocker listing... "I tried several design variations, and that thumb just kept being a problem!! Way too hard to pull the finished mitten on without stretching the whatsis out of the cuff!! SO, I came up with the idea of the removable thumb, which can easily be slid inside and attached once the mitt is placed on the blocker 😃"
Available in pairs of small (2 1/4" palm)/medium (2 1/2" palm) OR medium (2 1/2" palm)/large (2 3/4" palm). Measurements are across the flat of the palm, just under the fingers.
*It is very important that you regularly check your blockers, especially the edges, and treat them with some kind of wood treatment, either a finishing oil or paste wax, to maintain them and prevent them from drying out and keep them waterproof. As they are wood, there is potential for 'wear and tear', even with careful use, which can usually be repaired with a very fine sand paper clear spray coat - even clear fingernail polish will do the trick.*